Hengstler 735 Series
This one design of indicator, with 5 large digits (18.5mm high LED, programmable all green and all red) is available in two forms.
The 735P described here is the pulse indicator, whilst the 735A described in the process indicator section displays analogue values.
The Hengstler 735P can be supplied as totalising counter, position indicator, tacho/rate meter, rate and totaliser, time counter, single preset counter, 2 x preset counter or batch counter. Standard outputs are single NPN and single C/O relay. Additional 2nd relay and linear output options are available for certain functions.
Features
- Large 5 digit display, 18.5mm high LED
- Display programmable to change red/green
- 4 easy keys for programming and manual reset
- Alarm indication/output status display
- Universal high voltage (90-264VAC) or low voltage (20-50VAC/DC)
- Time formats 9999.9s, 9999.9m, 9999.9h, mmm:ss, hhh:mm
- Counts up or down
- Very useful for alarm pre-warning (colour change) and then output at 2nd setting
Part Number Construction
| A | B | C | D | E | F |
|---|---|---|---|---|---|
| 0735P | 1 | 0 | 0 | 0 | 0 |
| 2 | 1 | 3 | 5 | 2 | |
| 4 | |||||
| 5 | |||||
| 6 | |||||
| 7 | |||||
| 8 | |||||
| 9 |
A = Design Series, in this case all 0735P
B = Function: 1 = Totalising, 2 = Position Indicator, 4 = Tacho/rate meter, 5 = Rate and Totaliser, 6 = Time Counter, 7 = 1 Preset Counter, 8 = 2 Preset Counter, 9 = Batch Counter
C = Output Relay 2 : 0 = none, 1 = with 2nd relay (not totaliser, 1 preset or batch counter)
D = Linear output: 0 = none, 3 = with 4-20mA (only postion indicator tachometers)
E = Interface: 0 = none, 5 = RS485
F = Power supply: 0 = 90-264V AC, 2 = 20-50V AC or 22-55V DC
